
If the cord runs across your skin, it can cause abrasions (like a rope burn) or severe cuts. Cuts and burns are more likely if the cord/tape/belt wraps around any part of the body. Avoid contact with the cord/tape/belt and never let it wrap around any part of your body.
- Avoid contact with the cord/tape/belt and never let it wrap around any part of your body.
- Do not allow slack to build up in the cord/tape/belt– you might get tangled in the slack.
- Do not touch the cord/tape/belt if the cord/tape/belt wraps around you. Turn around or pass the handle from one hand to the other to unwrap yourself. (See “Finger Amputation and Fractures”)
- If you want to further reduce the risk of cuts and burns, you can wear long sleeves and pants to protect your arms and legs.

If the cord/tape/belt wraps around fingers or catches on a ring, a hard pull on the leash can amputate fingers or break bones.
- Avoid touching the cord/tape/belt when the leash is attached to your dog and never let the cord/tape/belt wrap around hands or fingers.
- Do not hold the cord/tape/belt.
- Do not grab the cord/tape/belt to control your dog.
- If the cord/tape/belt gets entangled in a bush or other object, gain control of your dog before disentangling it. Do not touch the cord/tape/belt if your dog can pull on it. If you want to further reduce the risk of finger amputation and fractures, you can take off any rings and wear sturdy gloves.

If the leash or your dog’s collar breaks, or if the leash disconnects from your dog’s collar, the cord/tape/belt and hook can snap back with enough force to cause serious eye damage, broken teeth, cuts, and bruises. If the cord/tape/belt is under enough tension, this can happen even when the leash is locked.
- Follow instructions for inspecting, attaching and detaching the leash in the “Directions” portion of this pamphlet.
- Tighten the safety collar around your dog’s neck and attach the hook to your dog’s regular collar. The safety collar prevents snap-back if the dog’s collar or the hook breaks, or if the leash disconnects from your dog’s collar.

Because the flexi™ leash is longer than regular leashes, your dog can build up more speed and pull on it harder, possibly pulling you to the ground.
- If your dog starts running away from you, immediately press the brake button to keep your dog from building up too much speed. If your dog has already built up speed, you will be pulled when you hit the brake or if the dog reaches the end of the leash.
- Do not allow slack to build up in the cord/tape/belt – your dog may run and build up speed until the slack runs out, suddenly pulling you.
- Have secure footing. Do not use the leash while on wheels (for example, a bike, skateboard or roller blades).

Bystanders are at risk of all of the injuries described in this pamphlet. In particular, they can be cut by the cord/tape/belt if they contact it or if it wraps around them. They might also trip on the leash.
- Be aware of bystanders. They might not notice the cord/tape/belt. Control your dog and keep the cord/tape/belt away from them.
- When around other people or animals, shorten the leash and keep your dog at your side with the leash locked.
- Avoid using the flexi™ leash near small children, including children in strollers.
- If the cord/tape/belt gets wrapped around someone, tell them not to touch the cord/tape/belt. Gain control of your dog and do not touch the cord/tape/belt if your dog can pull on it.

DIRECTIONS
Make sure that all parts of the leash and your dog’s collar are in good condition and are not damaged, frayed, or broken.

- Always use the enclosed safety collar in addition to your dog’s collar as illustrated. The safety collar prevents snap-back if the dog’s collar breaks, or if the leash disconnects from your dog’s collar.
- Attach the hook of the leash to the D-ring of your dog’s collar. Never attach it to your dog’s ID tag ring. That ring is not strong and will break.
- Make sure that the hook is fully closed and securely attached to the collar D-ring and the rings of the safety collar.
Make sure your dog is under control. Fully retract the leash before detaching it.
Drying Instructions
If your leash gets wet, pull the cord/tape/belt out of the leash housing as far as it will go and lock the brake. Leave it to dry overnight in a place that is out of reach of children. When the cord/tape/belt is dry, carefully and slowly retract the leash to keep it under control.

Always hold the leash by the handle, never by the cord/tape/belt You can also hold the hand loop with your other hand for extra control. Never tie leash around a tree, pole, or any other object.
To bring your dog nearer, follow these steps and never touch the cord/tape/belt:
- Extend your arm forward and press the brake button.
- Step toward your dog and at the same time bring your arm to your side.
- Release the brake button and swing your arm towards the dog and press the brake button again.
- Repeat as needed.
Do not attempt to repair this leash. Do not open the leash housing. The leash housing contains a pre-wound spring that can cause injury if opened. See Limited Warranty. Opening the housing will void the limited warranty.